swaterhouse
Well-Known Member
Has anyone replaced the depth transducer located just forward of the starboard main? The manual says the deadrise is 17degrees, that would mean I would need a 20degree tilted transducer but I wasn't smart enough to measure it before I left Saturday and I want to place my order before my next visit. The manual shows the "sonar" transducer for the optional SR Navigator fish finder as a 12 degree tilt but doesn't list any tilt for the "standard" transducer.
I am replacing my auto pilot because my rotary dial on the control head is bad - a 1 degree turn can either be 0 or 20 degrees depending on it mood. I can tell you my mood when it decides 20 is NOT good!
This is the last of the NMEA0183 and SeaTalk and I want to remove it all and have everything be NMEA2000. This transducer is NMEA0183 and I would rather not run a gateway just for depth when a drop in replacement NMEA2000 transducer only cost $240.
I am replacing my auto pilot because my rotary dial on the control head is bad - a 1 degree turn can either be 0 or 20 degrees depending on it mood. I can tell you my mood when it decides 20 is NOT good!
This is the last of the NMEA0183 and SeaTalk and I want to remove it all and have everything be NMEA2000. This transducer is NMEA0183 and I would rather not run a gateway just for depth when a drop in replacement NMEA2000 transducer only cost $240.