Wrench size

[billnpat]

I have number's 10,11,12,13, open end and box wrenches...
i need a size 7/16" and a size 1/2" wrench.
what number would i use????
:huh:

 

[hack4alivin]

I have number's 10,11,12,13, open end and box wrenches...
i need a size 7/16" and a size 1/2" wrench.
what number would i use????
:huh:

A 7/16 and 1/2 would work.... Not to be smart or nothing the numbers you have there are metric wrenchs and are 10 - 13 mm. You must need standard sizes....

Get yourself a kit that contains both standard size and metric wrenchs, eventually you will need both.

 

[billnpat]

A 7/16 and 1/2 would work.... Not to be smart or nothing the numbers you have there are metric wrenchs and are 10 - 13 mm. You must need standard sizes....

Get yourself a kit that contains both standard size and metric wrenchs, eventually you will need both.

Gotcha....Thanks.....:thumbsup:

 

[electricaldoctor]

A 7/16 and 1/2 would work.... Not to be smart or nothing the numbers you have there are metric wrenchs and are 10 - 13 mm. You must need standard sizes....

Get yourself a kit that contains both standard size and metric wrenchs, eventually you will need both.

Roger that on the 'numbered wrenches'. :grin:

 

[chuck1]

Since it is in the Tiki Bar section.

This is a joke??? Right???

 

[cpt. sundancer]

Must be,i laughed :smt043

 

[billnpat]

Since it is in the Tiki Bar section.

This is a joke??? Right???

No joke wrong forum... :sorry :smt100

 

[billnpat]

Must be,i laughed :smt043

Why laugh?? not everyone is as smart as others when it comes to mechanics, i'm the first one to admit it.....:huh:

 

[capecodcruiser]

but what the hell are you asking???? A little sentence structure would help us help you!

 

[hack4alivin]

but what the hell are you asking???? A little sentence structure would help us help you!

BUT.... As in many threads on CSR the question was asked and the answer was given..... No need to take it any further.

 

[Rono007]

Geez guys. I feel uncomforatble reading this thread.

The guy asked a simple question about wrench sizes because he didn't understand. His question was answered politely on the very first post. It should have stopped there in my opinion.

 

[capecodcruiser]

I admit I am not the sharpest knife in the drawer, but what was the question?????

 

[billnpat]

but what the hell are you asking???? A little sentence structure would help us help you!

It was already answered.. Thanks...

 

[Rono007]

I admit I am not the sharpest knife in the drawer, but what was the question?????

Read the first post in the thread.

 

[capecodcruiser]

Ok, I am all done with this, but I did re-read it twice. I guess it's me.....have a nice day everyone!