JohnEGraham
Active Member
Hi, Had bad Water into the Oil Leak which is being fixed. The Aftermath is a semi thick Mayonnaise on everything. stuck under the intake manifolds, gunk from the top to the bottom of the Distributor:smt089 ( all Removed ) Going to try to suck the observable gunk off the top surfaces of the motor...
MY QUESTION: Can I fill the Block, sitting in my boat with Diesel or Kerosene for an Hour / Day? to try to Dissolve the mess inside the block, then use the Extractor to pull it out? I could Crank the Motor by hand to get the Mix to agitate... and of course than I would than and do a couple of Oil Changes before putting the motor back together.
Will I do more harm? Whats in the Engine that the gunk could now float up to
As a test: I thinking of putting some of this gunk in a bucket with the Diesel as a test to see how long it will take to dissolve and than use the Extractor.
Thanks
MY QUESTION: Can I fill the Block, sitting in my boat with Diesel or Kerosene for an Hour / Day? to try to Dissolve the mess inside the block, then use the Extractor to pull it out? I could Crank the Motor by hand to get the Mix to agitate... and of course than I would than and do a couple of Oil Changes before putting the motor back together.
Will I do more harm? Whats in the Engine that the gunk could now float up to
As a test: I thinking of putting some of this gunk in a bucket with the Diesel as a test to see how long it will take to dissolve and than use the Extractor.
Thanks