k-nutz
Member
- Jul 8, 2014
- 173
- Boat Info
- 2000 SunDancer 240
2013 GMC Sierra 2500 HD Denali 6.6 Duramax
- Engines
- 5.7 MERC w/BRAVO III
Good point. I will have to remember to take some penetrating lubricant to the marina with me tomorrow.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
LD, you might contact one of the admins about doing a sticky post of your pictures with a brief description. Judging by the number of folks I know with older Sea Rays that detest the rubber insert, there may be more volume for these.
Did you source the inserts, screw, nylon(?) washer and snap head?
That looks really first rate. I did a similar thing using a poly cutting board and my table saw. Not quite the same result.
Guys,
I'll do 50. Chris, Are you going to contact the fabricator?
Henry
Thanks for the info, did you ever get them and how much, if you remember, were they? Do I have to get the drawings off lawndoctor?
Also I'm assuming my 2003 225 Weekender has the same style and depth track. This post was titled "pre 2002 TM windshields."
Chris, how many of these wedges do you think I would need for my windshield all the way around? I'm curious to see how many you have before I order. Also, did you get the wedges drilled out to 10-32 as Brady was saying to me or 4-40 303 Stainless Insert for Metal that lawndoctor put up links too?
Thanks, Dave
[h=1][/h]