V-Berth Actuator

[Mike Schmalz]

Working on mine this week, will let you know. The parts are in the closet wall by the bed

 

[Michael C Dombai]

Thanks for letting us know and sharing!

 

[Mike Schmalz]

I just bought a 2012 450 and the bed remote doesn't work. I believe there is an actuator under the bed but can't find any tech info on it. Also not sure if there is a control unit and where it is located. Any intel on this from the forum would be appreciated.

Finally, we fixed my bed that would not move. First, you can disconnect it, and move it by hand if you want to do that. About 120.00 worth of parts is all you need. My problem became harder because the wire from the actuator was too short and bed kept pulling on it. I think that is what started my problem. So we had to pull new wires. I have pictures of the parts, not sure how to post on here. Contact me at mschmalzsr@gmail.com

 

[Mike Schmalz]

There is the only two parts you need

 

[Mike Schmalz]

Took out all the Sea Ray parts, just used the two parts pictures. Works perfect. Need help reach out.

 

[Pilot]

Took out all the Sea Ray parts, just used the two parts pictures. Works perfect. Need help reach out.[/QUOTE

Hi Mike
Thanks for posting this. I’m having same issue and was hoping for some more clarification, ie where you purchased the 2 replacement units, does this replace both the inverter and the control box and remote. Also is there a remote attached to operate the unit?

again, thx