Dman1991
Member
- Mar 20, 2018
- 32
- Boat Info
- 197i srv 260 twin 470 mercruiser Ann's mercruiser alpha 1 stern drives
- Engines
- Twin 470s with alpha 1 stern drives
Good afternoon I'm new to the forum.
I have a 1978 srv260 twin 470s and mercruiser alpha 1 drives.
My trim pump is a single solenoid setup the pump spins up motor raise perfectly no issues but it will not go Down the motor will spin slow like it's dragging and then stop after the outdrive goes down about 2 inches then it just clicks not a bad solenoid click but just a single click when I hit the Down button..
I cleaned the connections still the same outcome if the motor goes up the solenoid and motor have to be good right??
So I'm wondering if it's a fluid problem I checked the fluid it might be a little low but not empty and there's no water contamination...
Anyone else have any comments anything will be helpful thanks in advance
I have a 1978 srv260 twin 470s and mercruiser alpha 1 drives.
My trim pump is a single solenoid setup the pump spins up motor raise perfectly no issues but it will not go Down the motor will spin slow like it's dragging and then stop after the outdrive goes down about 2 inches then it just clicks not a bad solenoid click but just a single click when I hit the Down button..
I cleaned the connections still the same outcome if the motor goes up the solenoid and motor have to be good right??
So I'm wondering if it's a fluid problem I checked the fluid it might be a little low but not empty and there's no water contamination...
Anyone else have any comments anything will be helpful thanks in advance