Brady’s Bunch
New Member
After much consideration & effort of looking at replacing the existing lounge seat slide with heavy duty linear slides ($200-$300) and unable to find the replacement part I found an inexpensive solution. I removed the bent slide attached to the seat & a piece of 1/2” galvanized pipe slide into the opening. I used a 36” piece of pipe with a tee & a 10” piece with a cap for the leg with a rubber cap around it, secured to the seat with a 3/4” 2 hole pipe strap. It worked perfect! I took a saw & removed 3” from the leading edge of the track attached to the Fiberglas to allow the leg to fold up & out of the way. I’ll probably change the tee to a 90 & have the whole thing powder coated to avoid any rust from moisture but I’m only in for less than $20 in parts at this pointThanks Kevin, I'm taking a vice & clamps to the marina this weekend