dvoyer
New Member
I don't think the Bennett Trim Tabs NMEA kit requires calibration from a electronics point of view. Well, at least I never needed to calibrate the tabs. In any case, if you PM Tabman he could answer your question since he represents Bennett.
Cheers,
Kaoru
I have been in touch with Bennett and they told me that the calibration is done via software. My e7 doesn't permit a calibration. One of my tab is displayed perfectly and the other is slightly offset. On the Mercmonitor I see the exact same values as I see on the Raymarine e7. I was lucky for the port side tab and a bit less for the starboard side tab.
Dominic