Switch pad anchor light on

[murf 1]

Need idea's , I have a 2005 320 dancer and had a bad bank of starboard batteries and used the parallel switch to start the engine and the lack of clean voltage I fried the starboard switch pad. I bought a new switch pad and new batteries and everything works fine except that the anchor light on is constantly on so I thought the selonoid was stuck on so I replaced that but its still is on.
So first question is if I leave the battery switch on and have power going through the selonoid will that heat up or burnout? Second does anyone have any ideas on the light? I checked out the EIM pad and it looks to be okay. Thanks murf 1

 

[Cincy Aquaholic]

Possible that the new switch pad is bad? Not sure how you would diagnose that? Unfortunately I don't have any other suggestions. But could you tell me where you got the solenoid from? I'm putting a windlass on my 290 and need to decide if I need it. Lewmar doesn't provide wiring diagram for it but I know my boat calls for it if it was an option from the factory.

 

[murf 1]

I picked one up from my local Marine Max but my local RV dealer had the same one except it was twice the price.
I
The light does not seem to draw so I'll keep plugging away.