murf 1
New Member
- Jan 18, 2011
- 26
- Boat Info
- 03 240 sundancer, 2007 280 dancer, 2005 320
- Engines
- 5.0 mercruiser w/ bravo III , twin .5.0 now 6.2 mpi merc,'s
Need idea's , I have a 2005 320 dancer and had a bad bank of starboard batteries and used the parallel switch to start the engine and the lack of clean voltage I fried the starboard switch pad. I bought a new switch pad and new batteries and everything works fine except that the anchor light on is constantly on so I thought the selonoid was stuck on so I replaced that but its still is on.
So first question is if I leave the battery switch on and have power going through the selonoid will that heat up or burnout? Second does anyone have any ideas on the light? I checked out the EIM pad and it looks to be okay. Thanks murf 1
So first question is if I leave the battery switch on and have power going through the selonoid will that heat up or burnout? Second does anyone have any ideas on the light? I checked out the EIM pad and it looks to be okay. Thanks murf 1