beachstranded
New Member
I am trying to covert over to VesselView on a 2003 380DA. Mercury confirmed compatibility over the phone according to the engine serial numbers. I purchased a used vesselview and appropriate harnesses. The problem i encountered is that behind the lower instrument panel i only see one 4-port j-box. On that J-box the top 2 connectors appear to be connected to the starboard and port engine systems. Lower right went to the sc5000. Lower left connector has three wires that disappear into a bundle of wires.
I do not see anywhere to plug the harness connector labeled "ignition". I also do not see any where to connect the "wake" cable with only one j-box.
Connecting it to the one j-box, The unit powers up but does not detect the 2 engines after a sensor reset.
I have left another message with Mercury but am wondering if anyone has encountered this and can help.
Thanks...
I do not see anywhere to plug the harness connector labeled "ignition". I also do not see any where to connect the "wake" cable with only one j-box.
Connecting it to the one j-box, The unit powers up but does not detect the 2 engines after a sensor reset.
I have left another message with Mercury but am wondering if anyone has encountered this and can help.
Thanks...