Ruggable in Cabin

[rcknecht]

My wife and I installed ruggable <https://ruggable.com/> in our cabin, over our existing carpet. This was in place of the OEM carpet runners. We made a template, cut the bottom piece with scissors and then cut the top...My wife surged the top piece... It took about 2 hours total, and cost $140... Here is some pics (I could not upload them, so I have links below... <https://scontent-iad3-1.xx.fbcdn.ne...=33f07484c0bc47212876fc45280c8155&oe=5A376FF7> <https://scontent-iad3-1.xx.fbcdn.ne...=e12b92bbacd7d20e109882c278ea75bd&oe=59EB9091>
<https://scontent-iad3-1.xx.fbcdn.ne...=88f9233afab9d9d5ffd159d9fa85dc79&oe=59F183EA>

 

[Stee6043]

Looks good. How'd you get away for only $140? I see their 8x10 cover is quite a bit more than that?

Thanks for sharing! Always looking for something easy for my 340. I think I've talked myself out of hardwood...successfully...for now.

 

[rcknecht]

Looks good. How'd you get away for only $140? I see their 8x10 cover is quite a bit more than that?

Thanks for sharing! Always looking for something easy for my 340. I think I've talked myself out of hardwood...successfully...for now.

My wife found it on-line through staples for the 8'x10' for $140... It was $200 in other sites... She also got 3% back through e-bates...

 

[Little Ducky]

How do you keep the rug from walking?

 

[rcknecht]

How do you keep the rug from walking?

The rug is two pieces... the top cover sticks to the bottom very securely (like Velcro, but removable)... I vacuumed it and it did not move... The bottom piece is thicker with a rubber bottom that holds tightly to the carpet... We cut it (with scissors) wall to wall. No snaps are needed, except on the bottom piece where it wraps into the mid-berth... There were two snaps there from the carpet liner. There a no snaps needed in the top piece...