SR Tech
New Member
- Apr 16, 2008
- 181
- Boat Info
- 78 20' Seville
- Engines
- Ford 351 Winsor
Swapped TR->GEN 2 transom
All DTS boats with a HIN of K7 - E8 in the ninth and tenth position, in conjunction with 07 or 08 in the eleventh and twelfth position, need the command module updated to version 76
I'll make it short and sweet for everyone:
Bascially they had defects in potentiometers in the ERC(electronic remote control).
It will trigger a 6 second alarm, and you will get a fault code on your VV or SmartCraft.
When the fault occurs ECM goes into guardian which only allows 65% throttle. The unsafe part is that after the fault is triggered the shift position remains in the same gear, Until the ECM is reset.
Just a HEADS UP for everyone, it is a federal recall so the repair is on Mercury.
Recall is mainly for Outboards, but if you somehow fall into the range....
I'll make it short and sweet for everyone:
Bascially they had defects in potentiometers in the ERC(electronic remote control).
It will trigger a 6 second alarm, and you will get a fault code on your VV or SmartCraft.
When the fault occurs ECM goes into guardian which only allows 65% throttle. The unsafe part is that after the fault is triggered the shift position remains in the same gear, Until the ECM is reset.
Just a HEADS UP for everyone, it is a federal recall so the repair is on Mercury.
Recall is mainly for Outboards, but if you somehow fall into the range....
Last edited: