Skuza
Well-Known Member
Can just the antenna (spinning part) be removed from the base? I'd like to clean or paint it and wondering. I see 4 nuts on the bottom but are there wires inside that cannot be unplugged? Someone has to have done it.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
No problem removing the four nuts and antenna. But, make sure you lift it straight up and clear of the RF pin. That is a tiny pin waveguide in the middle of the base assembly - it if gets bent or damaged in any way the radar is toast. Get a large caplug and put over the seals and that pin so water doesn't get in there or the pin gets damaged. coat the O-rings with silicone grease when you put it back together.Can just the antenna (spinning part) be removed from the base? I'd like to clean or paint it and wondering. I see 4 nuts on the bottom but are there wires inside that cannot be unplugged? Someone has to have done it.