YeOldeStonecat
Active Member
- Jun 10, 2018
- 332
- Boat Info
- '97 300 DA "Me-Shell"
- Engines
- Twin 5.7 V-Drive
When using my buffer wheel on the boat, I have to run extension cords down into my galley. I've seen some people on the docks use little adapters that plug directly into the 30 amp dock power power, like when they want to run a pump to pump out a dingy, or vacuum, etc.
Can you basically get ANY 30 to 15 amp adapter? Or are there certain specs I should look for?
I found this little guy for 8 bucks on Amazon..says 30 amps but one of the prongs looks like it's missing a 90* bend.
https://www.amazon.com/Camco-PowerG...5&sr=8-14&keywords=shore+power+30+amp+adapter
Or there's this 28 dollar one here..
https://www.amazon.com/gp/product/B...4-1b19-589c-8d56-ab86cdc6778a&pf_rd_i=3398761
This one here looks like it has the 90* bend on the prong
https://www.amazon.com/Conntek-3012...ims&pf_rd_t=40701&refRID=SJ7H7EJEJ40THVR02J2H
Can you basically get ANY 30 to 15 amp adapter? Or are there certain specs I should look for?
I found this little guy for 8 bucks on Amazon..says 30 amps but one of the prongs looks like it's missing a 90* bend.
https://www.amazon.com/Camco-PowerG...5&sr=8-14&keywords=shore+power+30+amp+adapter
Or there's this 28 dollar one here..
https://www.amazon.com/gp/product/B...4-1b19-589c-8d56-ab86cdc6778a&pf_rd_i=3398761
This one here looks like it has the 90* bend on the prong
https://www.amazon.com/Conntek-3012...ims&pf_rd_t=40701&refRID=SJ7H7EJEJ40THVR02J2H