Rapidroy5858
Member
I am in the process of cleaning up my outdrives to repaint them.
I am overwhelmed by the different recommendations on how to go about the process.
I started out thinking I would go to bare aluminum as they have been neglected and thought it would be wise to start fresh.
I used a small da with an aluminum oxide disc to get a lot of the drive to bare metal, some hard to sand areas still show some green primer or black paint.
My question is what should I prime with since some areas are not to bare metal.
All input is GREATLY appreciated!
I am overwhelmed by the different recommendations on how to go about the process.
I started out thinking I would go to bare aluminum as they have been neglected and thought it would be wise to start fresh.
I used a small da with an aluminum oxide disc to get a lot of the drive to bare metal, some hard to sand areas still show some green primer or black paint.
My question is what should I prime with since some areas are not to bare metal.
All input is GREATLY appreciated!