Boca_Vincent
Active Member
Going all in on the name placement to right of the handle. Wife found a graphic for the other side that ties into our diving. Looks good on paper... we'll see. Making progress as of this morning.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Interesting how your exhaust ports are well above water line as well. Mine are right at the water line, perfect for little critters to get in to. I wonder if that's the difference between the gassers and diesels.
dang cant wait to see when finishedGoing all in on the name placement to right of the handle. Wife found a graphic for the other side that ties into our diving. Looks good on paper... we'll see. Making progress as of this morning. View attachment 91233
Sweet!!!! Love it how long does the wrap last ? Post picks of the sun fly pleaseWe should have had her back home already but the yard has me backed up on the running gear job. But coming together for the holiday weekend. The canvas shop just finished up the sunfly shade, so we won't have to roast on the deck. Wrap guy finished on Sat, and I did some touch up on the bottom and put the new zincs on. View attachment 91446 View attachment 91447
Wow looks amazing. Can you share how much that cost? Did you do it yourself or have it done. How long is the wrap supposed to last? Were in MI so only 6 months of use. I should've never showed the wife.Sweet!!!! Love it how long does the wrap last ? Post picks of the sun fly please
Thanks.Sweet!!!! Love it how long does the wrap last ? Post picks of the sun fly please
No, I would never attempt that job. This guy was a pro. Oceanwraps.com.Wow looks amazing. Can you share how much that cost? Did you do it yourself or have it done. How long is the wrap supposed to last? Were in MI so only 6 months of use. I should've never showed the wife.
The knob on the pin that secures the Tuna door broke off. It is lost. In order to unlock that door, I need to get a good grip on just the pin, which is difficult to do by bare hand. Attached is a pic.View attachment 91920
The pin is below the bolt in the center.
Anyone know where to get a replacement?
So many variables to give a standard answer, but generally speaking with my 3116s, I cruise around 22-23 knots at 2200-2300 RPM if I'm average loaded (~3/4 tank fuel, full water, etc. but not loaded down for a long trip). WOT throttle is listed as 2850RPM, I've tested that on occasion for short bursts, and got about 28 knots.Hi everyone. I'm looking for a 370ec with diesels. What is the cruising speed and RPM for the Cat 3116 340 HP and the Cat 3126 407 HP. Thanks
My wife and I were discussing the possibility of selling our 1999 370 EC. It has 480 hp Cummins 6.7 QSCs. They are much quieter and cleaner than the Cats. They are rated at 3300 rpm with a 3000 cruise. Fully loaded I can cruise at 30 knots though I usually run at 2600 rpms doing around 26 knots. According to the vessel view that is 65 % engine load.Hi everyone. I'm looking for a 370ec with diesels. What is the cruising speed and RPM for the Cat 3116 340 HP and the Cat 3126 407 HP. Thanks
My performance #s are the same as Kevin.Hi everyone. I'm looking for a 370ec with diesels. What is the cruising speed and RPM for the Cat 3116 340 HP and the Cat 3126 407 HP. Thanks
Previous owner on mine had a canvas cover made up in black material. The edges are bound, and there are snaps in various places to snap it in. He even had it cut out around the compass, so I never need to take it off to operate the boat. About once a year, I take it out and clean around the windshield gasket, then I throw the cover in the washer and get all the gunk off of it. Works really well, and keeps the glare from the sun off the dash. Here's what it looks like from the helm.Has anyone repaired or updated the dash area on their 370 express? There is a lot of realestate under the windshield. Mine is starting to look a little sun baked. I do try and cover it with towels when docked but 20 years has taken its toll. Just looking for ideas.
Great idea, might have to get one made.Previous owner on mine had a canvas cover made up in black material. The edges are bound, and there are snaps in various places to snap it in. He even had it cut out around the compass, so I never need to take it off to operate the boat. About once a year, I take it out and clean around the windshield gasket, then I throw the cover in the washer and get all the gunk off of it. Works really well, and keeps the glare from the sun off the dash. Here's what it looks like from the helm.
View attachment 92736
Kevin