Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
I was never able to get the main TV to work in the galley, so I am about to replace the tv but it needs a new tv mount. Question(s) :
1)I know not to drill too deep as to hit the sliding cabin door but how deep are the electronics on the other side? ; and
2) Where does the tv plug into as the old tv has a different power cord and it winds back somewhere behind the tv and side rail- see picture. Any thoughts? ( also the little drop down one in the lower back shows power but I was never able to power it up at all) - ok that is technically 3 questions
That is perfect - the picture helps a lot!!
I’ll probably just leave the drop tv up there for now and move it down on the priority list! Thanks for the quick reply.
I'm on Allatoona and have DISHTV installed on the dock which works ok. OTA has been non-existent here since I've had the boat. So it's either the Glomex itself, or the local tower locations, or I've got a bad connection somewhere inside the boat that I have not found yet.Thanks - Does your Glomex work switching between Cable at the dock and over the air ? I couldn’t get it to work on 2 separate TVs I tried on the boat…thanks again ( I do miss Lake Lanier as I had a boat at Aqualand for years when I lived there)
Just read your write up and awesome . Wish I could have used the existing mount but does fit the new tv. I just drilled three holes for the new mount for my 32” tv so fingers crossed ( didn’t sound or feel like I hit anything)
With this type of mount, will the t v stay put when underway or will you have to add some kind of strap? What mount did you you here?Thanks for all the help. Finished this morning. Mounted the new tv mount, fed the power cord behind the electrical panel to the outlet, and replaced the shroud/frame. Old original 23” tv had a bad cable connection so it went in the trash. Pictures attached with 32” tv.
Looks like there is Velcro in the second pick mounted to the plywood strips to hold it in place.With this type of mount, will the t v stay put when underway or will you have to add some kind of strap? What mount did you you here?
How do I fix or clean the following where windows are ?
What transducer are you replace with ?Need to swap the depth/temp transducer on our 2008. For anyone who has done this, how did you reach it? I tried to contort myself down and between the engines today. I can sort of reach it, but can't see it and reach it at the same time. I had debated pulling and replacing in the water but not if I can't see what I'm doing the whole time. Hoping someone else who has tackled this has a better idea.
What transducer are you replace with ?
I’m trying to find out what degree I need
Ever get it out ?
Thanks I’m thinking of putting in a Airmar dt800So I removed the paddle wheel on the boat and put in a Garmin Airmar B60....
AIRMARB6050/200KHZBronzeLowAPIRro-B60-20-MM 20 Deg | Includes Mix N Match Cable
Not too Happy with it though... As now I'm finding out its really for smaller boats... It does give water temp & depth though... But I notice sometimes I get blinking depth as im cruising...