After cooling down about the unfortunate event , I am ready to ask for some advise. I bought my sundeck last year and at the same time purchased a new trailer to go with it. It seems that the roller in the front of the trailer is very soft and the boat smashes it ( it was this way when I picked it up from the dealer , after they loaded it up on the trailer for pickup) . Here's the bad part the trailer builder square cut metal support for the roller. The roller smashes enough that the support metal has gouged my bow.
So do I load up the trailer and take a 2 hour drive to the builder and rant and rave? Or take the hit , fix the trailer support and gel coat my self?
Can there be a bow stop made for it instead of the roller? I included pic
Thanks
Sent from my SAMSUNG-SM-G891A using Tapatalk
So do I load up the trailer and take a 2 hour drive to the builder and rant and rave? Or take the hit , fix the trailer support and gel coat my self?
Can there be a bow stop made for it instead of the roller? I included pic
Thanks
Sent from my SAMSUNG-SM-G891A using Tapatalk