AKBASSKING
Active Member
- Apr 13, 2008
- 4,649
- Boat Info
- 1988 Yacht Fisher
- Engines
- Twin 375hp Cat 3208 T/A
OK, need advice from the Sea Ray experts.
I just bought a 1986 300DB. The former owner bought it in 2000 and has done nothing with it. When you run your hand across the fiberglass, it comes back white. I am an aluminum Alaska jet Boat owner and I don't have a clue about fiberglass, so here are a few questions. I have looked at "shining" thread and I see I have a lot of work ahead of me.
1.What is the proper procedure to buff out, wax and/or polish the fiberglass?
2. What is the differance between wax and polish?
3. I was told to use half polishing compound, half wax and use a high speed buffer. Is this correct?
Any help would be great.
I just bought a 1986 300DB. The former owner bought it in 2000 and has done nothing with it. When you run your hand across the fiberglass, it comes back white. I am an aluminum Alaska jet Boat owner and I don't have a clue about fiberglass, so here are a few questions. I have looked at "shining" thread and I see I have a lot of work ahead of me.
1.What is the proper procedure to buff out, wax and/or polish the fiberglass?
2. What is the differance between wax and polish?
3. I was told to use half polishing compound, half wax and use a high speed buffer. Is this correct?
Any help would be great.