370Dancer
Well-Known Member
- Oct 2, 2006
- 2,490
- Boat Info
- 1998 370 Sundancer
- Engines
- 380hp MAG MPI Gen VI with V drives
I am assuming that if I were to move, say one of the air conditioners from Leg 2 to Leg 1, that I am going to have to also identify the White Neutral, and probably ground, to move from the common Leg 2 bus to the Leg 1 bus as well?
There is a "relay panel" that is fed power by the Leg 2 Aft AC breaker, which powers the common AC raw water pump if either AC has demand for cooling. That puts a wrinkle in this puzzle.
I've put larger ACs in than factory, and need to re-distribute the loads accordingly.
any experience doing this?
There is a "relay panel" that is fed power by the Leg 2 Aft AC breaker, which powers the common AC raw water pump if either AC has demand for cooling. That puts a wrinkle in this puzzle.
I've put larger ACs in than factory, and need to re-distribute the loads accordingly.
any experience doing this?