Marine Teak
Member
Good morning JVM225
I have just had a look at the stock pictures of the 410 Sundancer Monaco Edition (2002) and it looks like you have the standard 60mm / 2.36" pole mount. Best to double check, but this are by far the most common used in power boats. If this is the case, we have the under table mounts for the pole in stock which are shown here:- https://www.marineteak.co.uk/all-pedestals/aluminium-under-table-mount-pedestal-base-107
If you pop an email over when you order your desired table we can include one free of charge for you - just mention that you are a member of the Forum.
The pole you have will taper at each end, but the middle measurement should be 60mm / 2.36"
If this is not the case, your local boat shop will have alternative sizes available.
As always, any questions please let me know.
Luke
I have just had a look at the stock pictures of the 410 Sundancer Monaco Edition (2002) and it looks like you have the standard 60mm / 2.36" pole mount. Best to double check, but this are by far the most common used in power boats. If this is the case, we have the under table mounts for the pole in stock which are shown here:- https://www.marineteak.co.uk/all-pedestals/aluminium-under-table-mount-pedestal-base-107
If you pop an email over when you order your desired table we can include one free of charge for you - just mention that you are a member of the Forum.
The pole you have will taper at each end, but the middle measurement should be 60mm / 2.36"
If this is not the case, your local boat shop will have alternative sizes available.
As always, any questions please let me know.
Luke