rcknecht
Well-Known Member
See page 31 of: http://www.searay.com/boat_graphics/electronic_brochure/Company1729/1C1_24_74DEIPR69ES.pdf
See number 6, remove (unscrew) the barbed fitting for the hose. Inster a nipple. Then a tee. Screw on a brass ball valve into the tee, with a hose fitting and cap. Screw the barbed fitting back into the tee, and reattach the hose. For the AC, I used a doubled barbed tee. For the genny, I screwed the tee into the strainer. Use plumbers tape on all threads... Sorry, I am not at the boat during the week and can't take a picture...\
See number 6, remove (unscrew) the barbed fitting for the hose. Inster a nipple. Then a tee. Screw on a brass ball valve into the tee, with a hose fitting and cap. Screw the barbed fitting back into the tee, and reattach the hose. For the AC, I used a doubled barbed tee. For the genny, I screwed the tee into the strainer. Use plumbers tape on all threads... Sorry, I am not at the boat during the week and can't take a picture...\