Identify this plastic drain plug

[oceanpearl]

Searay Sundeck 240 2008 Plastic Drain cracked.

 

[wyrman]

That's the water distribution housing.
Common piece to break.
There was a thread recently from another member, and he couldn't get one so he made one to get back on the water.

 

[wyrman]

http://clubsearay.com/index.php?threads/water-distribution-housing-help-needed.104636/#post-1229088

 

[oceanpearl]

http://clubsearay.com/index.php?threads/water-distribution-housing-help-needed.104636/#post-1229088

Thanks for this information.
My mechanic removed the water distribution housing and epoxied the cracked unit after grinding it in preparation. It will be installed today and will let you know the results.
310 is a great boat!!

 

[oceanpearl]

Thanks for this information.
My mechanic removed the water distribution housing and epoxied the cracked unit after grinding it in preparation. It will be installed today and will let you know the results.
310 is a great boat!!

Sorry for the late reply news.
The distributor housing was repaired with epoxy and reinstalled without a leak.
Being a cautious person, I purchased a new one and personally reinstalled it and now I have a spare. One thing I realized in the removal and install is to loosen the clamps and get the hoses to slightly rotate before removing the 3 bolts on the housing. The reinstall process is to install the housing with the 3 bolts after putting the hoses in place and then tighten the clamps. Installing with the tightened clamps did not allow the bolts to line up.