- Aug 25, 2008
- 1,819
- Boat Info
- 2006 320 V-Drives 6.2s, Bow Thruster, Generator, Raymarine C80, Radar, Fish Finder
- Engines
- 6.2 Horizons 320HP
I removed my propellers this past weekend to send them out for repair. When I tried to loosen the nuts, the shaft turned. I had the bright idea to simply but the boat in gear and try again. I did, and the shaft still turned. I don't get it? I can turn the prop in both directions even when the boat is gear. Can someone explain why?
I was successful in removing the props. I wedged a framing hammer between the prop and the rudder. Using a prop puller, I had both props off in less ½ hour.
I was successful in removing the props. I wedged a framing hammer between the prop and the rudder. Using a prop puller, I had both props off in less ½ hour.