JVM225
Well-Known Member
Has anybody got a suggestion for a touch up on the black stripe just above the waterline ? I was pressure washing the scum line and nicked a little of the black stripe off. I'm sure no one would notice, but I notice and I can't have that...
Black is black as long as there is no flake in it so it should be easy to match.
I’ve done this a few times on different boats over the years.
Cut a nice piece to cover the nick, make sure there are no loose edges lifted around the nick, clean the vinyl in the area around it with rubbing alcohol to remove any wax that may be on the existing vinyl, install the patch piece with soapy water from a spray bottle, squeegee it smooth to get any bubbles out and you should be good to go in 24 hours.