searaypuget
Member
Hi
After reading all the threads on CF, I decided to check on my module (2008 496) and realized it looked somewhat different than what I had see in the previous postings. It looks there is a plate between the module and the hose as shown in the first picture. Is this normal? I am not sure what this white stuff around the plate in the picture 1.
What is the latest recommendation on the CF issue? This is what I've read so far.
I moor my boat in fresh water and so far I haven't had any issue at all. Expert opinion please
TOP
BOTTOM
METAL
After reading all the threads on CF, I decided to check on my module (2008 496) and realized it looked somewhat different than what I had see in the previous postings. It looks there is a plate between the module and the hose as shown in the first picture. Is this normal? I am not sure what this white stuff around the plate in the picture 1.
What is the latest recommendation on the CF issue? This is what I've read so far.
- Folks reported issues with CF Gen3. (paint in the housing flaking, thin wall causing water and fuel mix, bad hose fitting design and etc.)
- New improved module introduced and TB issued. The new module came with diff fittings but still had the same painted inside.
- New improved top using different material and no painting
I moor my boat in fresh water and so far I haven't had any issue at all. Expert opinion please
TOP
BOTTOM
METAL