wyrman
Well-Known Member
- Jul 12, 2012
- 1,924
- Boat Info
- 2007 310 Sundancer
- Engines
- Twin 350's, V drives
2003 Fisher 17 aluminum
90hp Honda 4 stroke
I don't know why Sea Ray put such an unusable sink in the galley. It was hard to wash anything, so I cut it out and replaced it.
In the process, despite taping the corian I managed to scratch it in the process.
From what I read I'm pretty sure I can buff it out.
Anyways, I sure am happy with how it turned out.
Both sink and faucet are from Amazon.
The faucet was only $37.00, and I was pleasantly surprised at the quality.
https://www.amazon.com/gp/product/B075295S1X/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
The sink is by Ambassador.
https://www.amazon.com/gp/product/B00G6JDX6W/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
And the drain assembly.
https://www.amazon.com/gp/product/B00GD8RTKW/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
The old one, as I was cutting it out. I cut it out so I could get an accurate measurement for the new sink size.
The new one finished.
I had a hard time finding a faucet because the microwave and coffee pot are right behind the faucet. I had to stay under 11" high faucet.
If the faucet was a tad smaller around it wouldn't have fit in the oversized hole that had the old faucet was in.
I also had to extend the drain hose. I bought a plastic barbed coupling, and some hose, no problem.
In the process, despite taping the corian I managed to scratch it in the process.
From what I read I'm pretty sure I can buff it out.
Anyways, I sure am happy with how it turned out.
Both sink and faucet are from Amazon.
The faucet was only $37.00, and I was pleasantly surprised at the quality.
https://www.amazon.com/gp/product/B075295S1X/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
The sink is by Ambassador.
https://www.amazon.com/gp/product/B00G6JDX6W/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
And the drain assembly.
https://www.amazon.com/gp/product/B00GD8RTKW/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
The old one, as I was cutting it out. I cut it out so I could get an accurate measurement for the new sink size.
The new one finished.
If the faucet was a tad smaller around it wouldn't have fit in the oversized hole that had the old faucet was in.
I also had to extend the drain hose. I bought a plastic barbed coupling, and some hose, no problem.