mwph
Well-Known Member
- Jul 8, 2008
- 3,229
- Boat Info
- 1998 250 DA
- Engines
- 7.4L, B3
Can anyone tell me if these are a standard size for most boats?
Freshwater pressure inlet/regulator
- Thread starter mwph
- Start date
- May 14, 2008
- 3,541
- Boat Info
- 1988 390 EC
- Engines
- 454 Mercruiser Gassers
Looks good to me. :smt038
tdschafer
Well-Known Member
Yup!!
Sent from my iPhone using Tapatalk
Todd
Sent from my iPhone using Tapatalk
Todd
The Jabsco is slightly bigger than and Shurflo. Found out the hard way, but oversized the hole for the Jabsco unit.
Edited:
I may have this backwards. The one shown above I believe is the original Jabsco. I put in a shurflo and I needed to oversize the hole opening to accept the new one. It was the chrome one http://www.iboats.com/PRESSURE-REGU...9081293--session_id.020001234--view_id.928310
Edited:
I may have this backwards. The one shown above I believe is the original Jabsco. I put in a shurflo and I needed to oversize the hole opening to accept the new one. It was the chrome one http://www.iboats.com/PRESSURE-REGU...9081293--session_id.020001234--view_id.928310
Last edited:
