WelikeithereonShuswap
Member
- Oct 14, 2018
- 57
- Boat Info
- 260 Sundancer 2002, 5Kw Westerbeke Genny,
5.0mpi/new B3 in 2023, Simrad gps plotter/sounder.
- Engines
- Merc 5.0 MPI, w Bravo III Drive
I'm trying to rig up my new to me 260da for some trolling for salmon but mostly rainbow trout. I want transfer both my two elec scotty down riggers from my old 21 ft boat.
Im trying to keep the gunnel set up as clean as possible while riggers removed and are stored.
I intended to remove the factory perko rocket rod holders and locate scotty base to cover hole.
My dilemma is the base..scotty base plate is 5.5 x5.5 inches
That base is about 1 inch wider than the gunnel at that location due to radius edge. So either indoard or outboard some of the base would be a catching hazard to passengers or rub on the camper canvas outboard. So a permanent mounting of the base is not my prefered choice.
I also want to be able to mount my BBQ off either gunnel.
I found a system made by Burnewiin specifically the GM650 mount along with required number of um6080, sc1036..
And possibly the bq6600 mount
This system Seems to check all my required boxes
Solid ss, clean look when not used, versitile..
Have Any CSR members either installed on thier boat or familiar with this make.?
Im trying to keep the gunnel set up as clean as possible while riggers removed and are stored.
I intended to remove the factory perko rocket rod holders and locate scotty base to cover hole.
My dilemma is the base..scotty base plate is 5.5 x5.5 inches
That base is about 1 inch wider than the gunnel at that location due to radius edge. So either indoard or outboard some of the base would be a catching hazard to passengers or rub on the camper canvas outboard. So a permanent mounting of the base is not my prefered choice.
I also want to be able to mount my BBQ off either gunnel.
I found a system made by Burnewiin specifically the GM650 mount along with required number of um6080, sc1036..
And possibly the bq6600 mount
This system Seems to check all my required boxes
Solid ss, clean look when not used, versitile..
Have Any CSR members either installed on thier boat or familiar with this make.?