wish2fish
Active Member
As you may know my boat was moored near a lightning strike and the Electronic Interface Module and the radio were fried. Tonight I got a chance to install the replacement radio and the remote wouldn't work. I guess the remote fried as well.
I have the choice replacing with the same CMRC2 or changing to a CMRC1 which has the display. The problem I might have with the CMRC1 is the size of the unit. I took a look at the manual and I can't tell if it needs a 2" or 3" hole. I would also need to know the diameter of the face to see if it would work on my dash. If you have either of these 2 measurements I would appreciate your response.
I have the choice replacing with the same CMRC2 or changing to a CMRC1 which has the display. The problem I might have with the CMRC1 is the size of the unit. I took a look at the manual and I can't tell if it needs a 2" or 3" hole. I would also need to know the diameter of the face to see if it would work on my dash. If you have either of these 2 measurements I would appreciate your response.