Calling all 360 DA owners

[JohnnyR222]

How I didn’t see that I have no clue, thank you so much

 

[JohnnyR222]

I don’t have that on mine?

 

[Tripsdad]

I don’t have that on mine?

That's because you are still on the 360DA Thread. If you click on "Sport Yacht/Yacht" right above the thread title you can you should see it and start a new thread asking about general issues like your question about swim platform load limits. If you click just to the left of "Sport Yachts/Yachts" on "Forums" you can pick more specific forums like Electronics if you have an electronics question. You can also use the search function since they is a good chance there is existing info on many topics.

 

[Mountain Man 20]

I added the Hurley H3 last summer to my 360. It is a one person solution. I have a 10’ Fiberglass bottom Mercury dinghy with a 9.9hp Mercury outboard. It is easy to load. I recommend the extensions to give you room to walk between the lazerette and the dinghy. I ordered the hand crank version of the H3. The Paul on it is not the greatest but is acceptable.

How much room do you have between the lazerette and dinghy on the platform (with H3 extension)? I am debating H3 with the ridiculously priced extension vs davits off the back off the platform (although I think the issue will be my slip wont accommodate that additional length… so H3 may be necessary).

 

[Tripsdad]

Has anyone replaced the TV in the aft cabin? I can’t see how to remove the old TV. The only access I can find is from the bottom after removing the DVD player but it’s too far back to get my hand up enough to do anything.

Appreciate any help with this.

 

[techmitch]

Has anyone replaced the TV in the aft cabin? I can’t see how to remove the old TV. The only access I can find is from the bottom after removing the DVD player but it’s too far back to get my hand up enough to do anything.

Appreciate any help with this.

View attachment 141994

I got a buddy that used to say, "grip it and rip it" I wouldn't advise that, but a firm grip and some sharp tugging may be in order. I would first get a endoscope like this one or similar, you will use it way more than you think. https://www.amazon.com/BlueFire-Sem...jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

 

[Tripsdad]

I got a buddy that used to say, "grip it and rip it" I wouldn't advise that, but a firm grip and some sharp tugging may be in order. I would first get a endoscope like this one or similar, you will use it way more than you think. https://www.amazon.com/BlueFire-Sem...jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

Funny, I was very close to doing exactly that (grip it and rip it) as I was trying to figure out how to get it to release from the mount but figured that would be a last resort. As I was writing the post I thought about trying to get my phone behind it to get a view but the endoscope is a great idea.

Thanks Mitch!

 

[Skipno6]

Hey All - getting ready for a new boating season and finally decided it’s time to either replace or get the Coolmatic RPF 50 original 360 DA OEM freezer fixed. It runs but doesn’t do anything. I haven’t been able to find out here what folks have replaced it with (want to use the OEM insert/cover so it matches).

I’m open to convertible freezer/fridge or just a freezer. Attached is a pic of the sticker. Saw some very old discussions here of OEM freezers for sale…but that’s it. Thoughts or direction is much appreciated. Thanks!
View attachment 142274

 

[Tripsdad]

Hey All - getting ready for a new boating season and finally decided it’s time to either replace or get the Coolmatic RPF 50 original 360 DA OEM freezer fixed. It runs but doesn’t do anything. I haven’t been able to find out here what folks have replaced it with (want to use the OEM insert/cover so it matches).

I’m open to convertible freezer/fridge or just a freezer. Attached is a pic of the sticker. Saw some very old discussions here of OEM freezers for sale…but that’s it. Thoughts or direction is much appreciated. Thanks!
View attachment 142274

I had the same issue with my freezer a few years ago. I pulled it and brought it to a local marine refrigeration service and they added freon and I believe had to to also add a port but it's been ice cold ever since. Cost a little more than $200 if I remember correctly.

 

[Skipno6]

I had the same issue with my freezer a few years ago. I pulled it and brought it to a local marine refrigeration service and they added freon and I believe had to to also add a port but it's been ice cold ever since. Cost a little more than $200 if I remember correctly.

Thanks for the tip! Good idea. If that doesn’t work, are you aware of a good replacement freezer or convertible unit (freezer or fridge combo)?

 

[Tripsdad]

Thanks for the tip! Good idea. If that doesn’t work, are you aware of a good replacement freezer or convertible unit (freezer or fridge combo)?

I am not aware of a direct replacement but I haven’t looked. Post 974 and a few following in this thread talk about VITRIFRIGO as a possible replacement. Let me know if you repair or find a replacement.

 

[Skipno6]

I am not aware of a direct replacement but I haven’t looked. Post 974 and a few following in this thread talk about VITRIFRIGO as a possible replacement. Let me know if you repair or find a replacement.

Will do! Thanks much.

 

[Skipno6]

Hey All - getting ready for a new boating season and finally decided it’s time to either replace or get the Coolmatic RPF 50 original 360 DA OEM freezer fixed. It runs but doesn’t do anything. I haven’t been able to find out here what folks have replaced it with (want to use the OEM insert/cover so it matches).

I’m open to convertible freezer/fridge or just a freezer. Attached is a pic of the sticker. Saw some very old discussions here of OEM freezers for sale…but that’s it. Thoughts or direction is much appreciated. Thanks!
View attachment 142274

Fixed pic so you can read it now! Thanks.

 

[Tripsdad]

Funny, I was very close to doing exactly that (grip it and rip it) as I was trying to figure out how to get it to release from the mount but figured that would be a last resort. As I was writing the post I thought about trying to get my phone behind it to get a view but the endoscope is a great idea.

Thanks Mitch!

Hi Mitch,

I didn’t get back to the TV since I got the scope but I used it today at home replacing the hose on the kitchen sink faucet. Glad I took your suggestion! Thanks.

 

[Skipno6]

TGIF - Does anyone know where to get OEM (or other) transom door stainless sliding latch receiver hardware? The part doesn’t appear on the original 360 DA spec/schematic. I’m not sure if the previous vessel owner made the one that was installed…but it cracked (was not stainless). I replaced it with a 3D printed part (see pic, not not too shabby : ) but I’d like to replace it with a stainless hardware as I have a feeling my interim solution will not last.

I had a dealer look into this for me and they came up dry - could not find the part number either and Sea Ray wasn’t any help. Thanks!

 

[Tripsdad]

TGIF - Does anyone know where to get OEM (or other) transom door stainless sliding latch receiver hardware? The part doesn’t appear on the original 360 DA spec/schematic. I’m not sure if the previous vessel owner made the one that was installed…but it cracked (was not stainless). I replaced it with a 3D printed part (see pic, not not too shabby : ) but I’d like to replace it with a stainless hardware as I have a feeling my interim solution will not last.

I had a dealer look into this for me and they came up dry - could not find the part number either and Sea Ray wasn’t any help. Thanks!

Nice job on the 3D printed replacement. I don't remember what the original looks like but I'll take a look when I go to the boat tomorrow. This looks like the latch that holds the transom door open and I would expect your replacement to last a long time given there should not be much stress in this application.

 

[Tripsdad]

Has anyone changed out there cabin door latch/lock? Mine latches and locks from the outside but the locking mechanism on the inside of the door is frozen in the open position. Not the biggest issue but I would like it work properly.
Any help would be greatly appreciated.

 

[Cam.H]

Has anyone changed out there cabin door latch/lock? Mine latches and locks from the outside but the locking mechanism on the inside of the door is frozen in the open position. Not the biggest issue but I would like it work properly.
Any help would be greatly appreciated.

Thank you very much for asking this question Tripsdad. Mine is the same as well and I would like it to function properly as well.

Cam

 

[Skipno6]

Nice job on the 3D printed replacement. I don't remember what the original looks like but I'll take a look when I go to the boat tomorrow. This looks like the latch that holds the transom door open and I would expect your replacement to last a long time given there should not be much stress in this application.

Appreciate it! That’s correct. I hope it holds up too. The material for the 3D printer happened to be very close to DA white! Stainless would be ideal.

If you get a sec, could you post a pic of what you have?

 

[techmitch]

TGIF - Does anyone know where to get OEM (or other) transom door stainless sliding latch receiver hardware? The part doesn’t appear on the original 360 DA spec/schematic. I’m not sure if the previous vessel owner made the one that was installed…but it cracked (was not stainless). I replaced it with a 3D printed part (see pic, not not too shabby : ) but I’d like to replace it with a stainless hardware as I have a feeling my interim solution will not last.

I had a dealer look into this for me and they came up dry - could not find the part number either and Sea Ray wasn’t any help. Thanks!

Appreciate it! That’s correct. I hope it holds up too. The material for the 3D printer happened to be very close to DA white! Stainless would be ideal.

Excellent job? I'll bet with a couple slight larger oval head screw's and some sealant, that thing will be good for quite some time.