Riptide III
3D
- Dec 8, 2007
- 1,139
- Boat Info
- 1997 Sea Ray 400DA
Cat 3116 TA
1994 Sea Ray Laguna CC 250 Tohatsu
- Engines
- :
Looking great keep the pictures coming. Thank you
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Yes. I understand it's different. Also, it is very firmly attached to the radar arch as well. All I'm saying is the torque forces in the hull caused fractures in the mounting hardware. These occurred above the windshield and required some beefing up. Just wondering if your design process considered those forces and the fasteners are strong enough to withstand the loads. My earlier SRs flexed quite a lot when running in blue water and leaked at the rubrails in heavy water. That creates forces on the hardtop.The Tiara top is a much different design that the SR380DA....the SR has the entire aft edge of the hardtop permanently bonded to the radar arch,
Your lucky, my wife made me do my last big boat project on my side of the garage.One coat of TotalBoat Top Side Primer followed by one coat of TotalBoat Wet Edge paint....looking good and getting anxious to install on boat and start on the rear hardtop so that my wife can park car back in the garage!View attachment 81158
I have a varnish tent set up in my garage. Can’t wait to get that done.Your lucky, my wife made me do my last big boat project on my side of the garage.