Boat Length Query

[dickcour]

Greetings,
I am working on purchasing a Sundancer 320 or 340. Our club has a limit on length and measures this way –
1. Drop a plumb line down from the transom drain plug.
2. Drop a plumb line down from the bow, excluding the pulpit/winch.
3. Measure between the two.
Can anyone provide me the measure for each Sundancer or point me to a source that contains the measure for each model. It would be close to, but not exactly the water line length.
Our limit is 31 feet as measured above.

Thanks
Dickcour

 

[Strypes]

Welcome!

Google can be your friend! Check manufacture's specifications!

Cheers

 

[Lazy Daze]

Well, you're a lucky one. Many clubs/marinas will measure TOTAL overall length... including pulpit/anchor and swim platform.

What year are you looking at? In some years, the platform is included in the length of the boat... other years it's not. But, yes, check Sea Ray's website for the specs of whatever model/year you're looking at. For what it's worth, your waterline length is probably somewhere around 6 feet short of the measurement you're looking for. Chances are the 340 is going to be too long. Even the 320 will likely be too long - for example, an '07 320DA has an overall length of over 35', but that includes the platform. Figure a solid 2' for the platform. There might be a small setback to the transom, I don't recall well enough offhand.

EDIT: Got bumped off.

 

[Gofirstclass]

or call Sea Ray Customer Service at 321-449-8628

 

[The Bill Collector]

http://owners.searay.com/

 

[islandhopper00]

What boats are in the club now? 300, 310, 320, 340's
A 280 is measured at 31ft.

 

[dvx216]

center line on a 1985 340 DA is 33'7 " / 1993 330 DA is 32'10" I would think this is minus platform this is from Sea Ray owners resoures

 

[FootballFan]

On the SeaRay site there are spec sheets - I don't think they will help in this situation. You already have the "brochure" numbers.

What might help is the Model specific owners manual. The one I have on this current boat provides some much more specific measurements.

You should be able to download the manual from the SeaRay site.

Mark

 

[rcknecht]

33' 6" for the 340's ending in 2002...