xpken
New Member
i have a 1979 26' searay express crusier, with a single 260 merc. i have been having troubles with the inline fuse located between amp meter on the dash and the key switch. when it does blow, it pegs the amp meter at -60. ok now you know my problem let me tell the story.
A week ago i started my boat on flusk kit to get it ready for the water. ran fine no problem at all. i went to start it a couple days ago , the fuse that i was talking about poped, pu a new fuse in and it popped again. welli went though all the wiring checked thightness and signs of corosin. nothing. put a new fuse in (30a) and the boat started fine. went back to start it a hour later , and pop there goes a 30a fuse. so i check everything again, and still nothing. put another fuse in and pop. the batts are all charged fine and correctly, and connections have been clean,(starter, alt. , and so forth and so on) know i am stuck someone please help.
A week ago i started my boat on flusk kit to get it ready for the water. ran fine no problem at all. i went to start it a couple days ago , the fuse that i was talking about poped, pu a new fuse in and it popped again. welli went though all the wiring checked thightness and signs of corosin. nothing. put a new fuse in (30a) and the boat started fine. went back to start it a hour later , and pop there goes a 30a fuse. so i check everything again, and still nothing. put another fuse in and pop. the batts are all charged fine and correctly, and connections have been clean,(starter, alt. , and so forth and so on) know i am stuck someone please help.