HUMPH
Well-Known Member
- Nov 4, 2009
- 7,618
- Boat Info
- 2003 410DA
2009 Walker Bay 13’
- Engines
- CAT 3126TA's 350HP/
50HP Honda
Aren't They Pretty?
- Thread starter HUMPH
- Start date
moparlvr4406
Active Member
- Jun 29, 2011
- 4,462
- Boat Info
- 1985 340DA
1966 SRV180
(2)1960 Sea Ray 600
(2) 1963 808 Cruise-a-bouts
- Engines
- twin 350hp Crusaders 4.0 Onan /
Merc 950 SS
Merc 650
Merc 1100
twin Johnson 40
Almost too pretty to put under a boat where you can't see them
Bucit
New Member
- Mar 12, 2010
- 3,144
- Boat Info
- 2005 280 Sundancer
2004 SPD-104 Achilles w/ 8hp Yamaha
- Engines
- Twin 4.3 MPI's with Alpha drives.
That's some good looking BLING!
wetpaint
Active Member
I would mount them on the wall in my office
Nehalennia
Well-Known Member
- Aug 22, 2007
- 10,006
- Boat Info
- 2001 310DA twin 350 MAGs, Westerbeke 4.5KW
- Engines
- Twin 350 MAG V-drives
Nice
mistercomputerman
Well-Known Member
- Jan 6, 2008
- 4,321
- Boat Info
- 410 Sundancer - 2001
- Engines
- Twin 8.1L Mercruisers - 2009
Do they work?
HUMPH
Well-Known Member
- Nov 4, 2009
- 7,618
- Boat Info
- 2003 410DA
2009 Walker Bay 13’
- Engines
- CAT 3126TA's 350HP/
50HP Honda
My boat would be very efficient that way...
HUMPH
Well-Known Member
- Nov 4, 2009
- 7,618
- Boat Info
- 2003 410DA
2009 Walker Bay 13’
- Engines
- CAT 3126TA's 350HP/
50HP Honda
Let You know tomorrow afternoon!
Carpedmman
Member
They look great Ken! Hope they perform well too! Have a great Memorial Day Weekend!
HUMPH
Well-Known Member
- Nov 4, 2009
- 7,618
- Boat Info
- 2003 410DA
2009 Walker Bay 13’
- Engines
- CAT 3126TA's 350HP/
50HP Honda
Thanks, just spoke to my Harbormaster and the diver is there to install. Kind of like Christmas for me!
rondds
Well-Known Member
- Oct 3, 2006
- 8,859
- Boat Info
- 2001 380DA
- Engines
- Merc 8.1s (2008)...Hurth ZF 63 V-drives...WB 7.0 BCGD (2013), Garmin 8208 & 740 MFDs, GMR 24xHD dome
Can they embed LED lights into each blade for more effect?
mistercomputerman
Well-Known Member
- Jan 6, 2008
- 4,321
- Boat Info
- 410 Sundancer - 2001
- Engines
- Twin 8.1L Mercruisers - 2009
There you go again. You need to get some help for your fixation on LED lights. It's not healthy.
chandalen
New Member
- Aug 7, 2011
- 367
- Boat Info
- '83 Sundancer 270, Humminbird 593c
- Engines
- Twin merc 305, with new SEI 106 drives
... hey I was thinking the same thing about LED's ...
osd9
New Member
Notice those lines on each blade. They are the radii that the pitch is measured at on each blade. Typical scans are made to 4 or 5 radii. I had two pair of props that I had reworked to be the same pitch. When we swapped them out the perforamance was different between the sets. Had the shop re-scan down to 8 radii and found that the props were different in the inner radii. Reason was because the second set of props were originally cast with 2" less pitch when new. When they were reworked, they weren't the same as the other set that originally had 1" more pitch when cast new. Important to know this info if you are tyring to get to sets of props to be identical to each other....especially if you only swap out one prop for example after hitting something.....best to swap out in pairs.
- Feb 4, 2007
- 7,251
- Boat Info
- 1996 450DA, TNT, Caribe dink w/15hp OB.
- Engines
- 3126 427HP TD transmissions
You just pooped in his Christmas stocking.
HUMPH
Well-Known Member
- Nov 4, 2009
- 7,618
- Boat Info
- 2003 410DA
2009 Walker Bay 13’
- Engines
- CAT 3126TA's 350HP/
50HP Honda
And it was squishy! Got to the boat, washed her a bit and the wind kicked up to about 35 knots. Not good for towing a tender so I am in the damn marina until first light. The wind has not subsided yet...
- May 14, 2008
- 3,541
- Boat Info
- 1988 390 EC
- Engines
- 454 Mercruiser Gassers
What does it cost to get this done?
mistercomputerman
Well-Known Member
- Jan 6, 2008
- 4,321
- Boat Info
- 410 Sundancer - 2001
- Engines
- Twin 8.1L Mercruisers - 2009
$400 - $600 per pair, give or take.
