Greetings all,
I have been planning my stereo upgrade for quite some time and I plan on installing a Kinetic 1800 AGM battery exclusively for the stereo. I want to mount this battery in the same area/location in the cabin that the amp and the power supply will be located.
I have already purchased the following.
<Each item below links for more info about the item>
1. Kinetik Kips1245 power supply / Charger
2. Kinetic KHC1800 AGM Battery
3. Blue Seas 60 Amp Breaker
and other misc mounting hardware, battery tray, zip ties, terminals, and so forth.
My question is, do I have to run a round wire to my other bank of batteries or can I keep this one completely sealed off from the other bank. I plan on mounting the battery under the seat and the amp under the stairs in my boat. I want to keep the runs short to keep the logistics easy and also reduce lost voltage. What should I make sure I do and what to look for?
Thanks for you help and feed back.
I have been planning my stereo upgrade for quite some time and I plan on installing a Kinetic 1800 AGM battery exclusively for the stereo. I want to mount this battery in the same area/location in the cabin that the amp and the power supply will be located.
I have already purchased the following.
<Each item below links for more info about the item>
1. Kinetik Kips1245 power supply / Charger
2. Kinetic KHC1800 AGM Battery
3. Blue Seas 60 Amp Breaker
and other misc mounting hardware, battery tray, zip ties, terminals, and so forth.
My question is, do I have to run a round wire to my other bank of batteries or can I keep this one completely sealed off from the other bank. I plan on mounting the battery under the seat and the amp under the stairs in my boat. I want to keep the runs short to keep the logistics easy and also reduce lost voltage. What should I make sure I do and what to look for?
Thanks for you help and feed back.