4Schrecks
Member
Dave,All you have to do is re-route one coax cable from the back of the Glomex controller (mounted to the panel in the closet). You unscrew the cable connected to the "To TV" connector on the Glomex and plug that cable into the "out" side of the converter box. Then you take the other coax provided with the converter and plug it into the "in" side of the converter and plug the other end back into the (now) empty slot in the Glomex. The only other caution I will mention is before wiring in the power for your converter, you will have to use an ohm meter to figure out which wire comming from the controller is the hot side and which is the ground since the wires are not marked. The Sea Ray 12V wiring is color coded so splicing into that is easy.
I'm sorry but I'm confused...wouldn't you take the one "to TV" and plug into the "from ant" on the box? And then take the cable from the box to the TV?