About this forum section - Please Read

Discussion in 'Ask a Sea Ray Employee...(No Longer Active)' started by CSR_Admin, Mar 7, 2009.

  1. CSR_Admin

    CSR_Admin Administrator Staff Member

    Mar 10, 2004
    A CSR user named Chelepop is an employee of Sea Ray and has graciously been donating her time to answer questions. She will do her best to find out information and to answer questions about your Sea Ray. This is in no way affiliated with or sponsored by Sea Ray or the Brunswick corporation. Of course we welcome participation from anybody affiliated with Sea Ray or Brunswick.
     
  2. chelepop

    chelepop New Member

    121
    Feb 26, 2009
    Knoxville Tn
    boatless
    boatless
    Thank you Jim, and I'll be open with any questions about our vessels, bilge I can offer some assistance, as asking the 'lifers' at work who do the bilge. The rest of the vessels is up for grabs. I hope this helps you.. Please understand not all questions I can address under the "LOOSE LIPS, SINKS SHIPS" , but I will address that as they come in. I will try to resolve your issues but earlier years might pose a bump.

    Hope I can help ya, but my constraints to my company still stand firm.
     
  3. geriksen

    geriksen New Member

    378
    Jul 24, 2007
    Austin TX
    98 500 Sundancer
    6V92 DDEC Detroits
    Are you from Nigeria?
     
  4. Lee O'Brien

    Lee O'Brien New Member

    1
    Mar 7, 2009
    I have a 1985 207 runabout. Lowered the trim. Now won't trim up.
    Wiring is dientegrated so power won't work I have a J1171 SAE trim pump. The Owners Manual has diagrams of two trim pumps, Oyldyne and Prestolite, showing a manual release screw, but I can't find one on the J1171. Is there a release that will allow manually raising the outdrive?
     
  5. Ftrpilotslim

    Ftrpilotslim New Member

    3
    Jun 9, 2009
    I have a 1987 Pachanga 22 and my front seat skins need to be replaced. Does Sea Ray still carry those or is there a place I can go to have them made?

    Thanks!
     
  6. Nehalennia

    Nehalennia Well-Known Member

    Aug 22, 2007
    Marysville, WA
    2001 310DA twin 350 MAGs, Westerbeke 4.5KW
    Twin 350 MAG V-drives
    Post it as a new thread.
    I doubt SeaRay still makes those but you can get a local shop, I'm sure, to do it.
     
  7. 320Sundancerjpe

    320Sundancerjpe New Member

    1
    Jul 3, 2009
    The shaft of a screw driver , about 7 in. long, fell onto the right gas tank of a 320 Sundancer, I tried to pull it out with a magnet to no avail. I'm sure it didn't get unto to tank itself it must be somewhere in the connecting hose. Any tips on how to pull it out?
     
  8. sanders46

    sanders46 New Member

    1
    Jul 31, 2009
    Arlington, VA
    320 Sundancer, 2003
    Twin-350 Magnum MPI Horizon MerCruiser - V-Drives
    I have a 2003 32' (320) Sea Ray Sundancer. Lost chain/rope anchor rode (long story). Does anyone know the length of the chain (I guessing 20' to 30'), type of chain (BBB or G4?), size of chain (1/2", 5/8", 3/4" etc) and size of rope that come with the 320 Sundancer?
     
  9. Rhett

    Rhett New Member

    1
    Aug 16, 2009
    Connecticut
    Sea Ray Sundancer 27
    454 Merccruiser-7.4MPI Bravo III MCM
    The trim tabs appear to be stuck in an extended position. Is there a problem with using the boat until we have them repaired? Advice and suggestions welcomed.
     
  10. Bridog

    Bridog Well-Known Member GOLD Sponsor

    Oct 4, 2006
    Gulf Shores AL / Brick NJ
    2016 19SPX OB
    Mercury 150 4S OB
    FYI, Just an observation but Chelepop doesn't participate very often. Last reply was 8/15. Maybe there are other Sea Ray employees who would like to help out in this section???
     
  11. Quint4

    Quint4 Well-Known Member TECHNICAL Contributor SILVER Sponsor

    Oct 6, 2006
    S.W. Ohio
    330 Sport Bridge
    5.7 MPI 350 Merc Bluewaters
    Wow look at all the brand new members posting here...mmmm.
     
  12. Donald46

    Donald46 New Member

    35
    Nov 13, 2008
    Great South Bay Long Island NY
    350 Sundancer 2010 w/Axius Raymarine C-80 GPS/chart plotter Radar Smart Craft
    Mercruiser Stern Drive Axius ECT377 MPI BR3
    Good Morning,

    I am trying to find out about the SKYHOOK feature. I now have purchased a 2010 350 Sundancer. The boat will arrive in New York at Surf Side 3, sometime in late November or early December of this year.

    Will this boat have the SKYHOOK feature installed or do I have to wait for Merc-Crus. to install it before the 2010 season. I am trading in my 2008 310 Sundancer which did not have the feature. The Axius system is the best thing to happen to boating in many years.
     
  13. kevinnice

    kevinnice New Member

    220
    Aug 17, 2009
    SPAIN
    290 searay sundancer 1996
    dual mercruiser 43 lx
    what? did those questions just pop up from nowhere? the poor girl only knows bilge... at least, i think thats what she said?
     

Share This Page

Show Sidebar