Graham Lorimer
Member
- Feb 13, 2009
- 436
- Boat Info
- Sundancer 460 2002
Volvo 480 HP
Raymarine Electronics
Avon 320DL RIB
Yamaha 25HP 4 Stroke
- Engines
- Volvo 74 TAMD EDC
I posted the queries below on the 460 owners thread, but had no replies. probably all issues are fairly common to Sea Ray models, hoping for some guidance.
Can somebody please tell me what the GFI supplies power to (I think it is called that, it is a circuit breaker with a reset button on it) that is located under the Cockpit hand basin.
When I turn it on, after about 4 hours, it blows the trip on the pontoon and in the engine room, and sometimes also the trip that supplies power to the whole length of the pontoon, about 20 boats.
I can not find anything that is not working with it turned off, but I guess it supplies to something, and that must be where my problem lies.
Any advice gratefully received, I am on the boat for another 5 days and would love to cure this issue.
Second question, has anybody renewed the fabric in the shade that pulls over the hatch in the saloon, the mossie netting is fine,but the fabric shade is very stained and I would like to change it.
Third question, can anybody make a suggestion as to why the Black water tanks always show as empty on the light readouts in the Heads and on the DB Board? No matter how full the tanks are, they always show empty, and I was hoping for some guidence before I start "digging around" down there.
Graham
Can somebody please tell me what the GFI supplies power to (I think it is called that, it is a circuit breaker with a reset button on it) that is located under the Cockpit hand basin.
When I turn it on, after about 4 hours, it blows the trip on the pontoon and in the engine room, and sometimes also the trip that supplies power to the whole length of the pontoon, about 20 boats.
I can not find anything that is not working with it turned off, but I guess it supplies to something, and that must be where my problem lies.
Any advice gratefully received, I am on the boat for another 5 days and would love to cure this issue.
Second question, has anybody renewed the fabric in the shade that pulls over the hatch in the saloon, the mossie netting is fine,but the fabric shade is very stained and I would like to change it.
Third question, can anybody make a suggestion as to why the Black water tanks always show as empty on the light readouts in the Heads and on the DB Board? No matter how full the tanks are, they always show empty, and I was hoping for some guidence before I start "digging around" down there.
Graham