460 DA Owners Thread

Hi Joint Custody,
Bottom track-AFT 39"
Bottom track FWD 26"

To measure the top tracks I need to start taking things apart.
If you really need them, I will do that.
 
HI folks. The black tank, despite being empty, is reading 1/2 full. Is there a secret or special way for me to get the sensors back reading properly? I suspect something got stuck in there. Maybe push some water in there a few times and suck it out? Thoughts?
 
Noflex or Carters' poopy powder. Search the forum for those. Either will likely clean the sensors and fix the problem.
 
Last edited:
You can get away with one pump. I will admit for the price it’s nice to have a backup because if one fails you’re still fine. I actually wish Sea Ray did this in more items… ie battery charger and AC pumps.
 
fr8dog said:
Noflex or Carters' poopy powder. Search the forum for those. Either will likely clean the sensors and fix the problem.
Click to expand...

I have noflex and put it in there. I"m guessing I really need to fill the tank with some water, suck out, do over and over.... yes?
 
I would say follow the directions on the Noflex bottle. Don't be in a hurry to empty the tank. When it's time from normal use empty then continue with the Noflex. May take a bit of time but the stuff just works.
 
Hey guys,
Looking for a set or port side 23x27 props for a 2003 46 dancer. Need ASAP so looking for a quick source.
 
Hi folks. I just had my new props put on and didn’t realize that I had shaft zincs and also didn’t realize I have 4 swim platform zincs (doh!). So I have to get her pulled again. What zincs should I get for the swim platform? I believe they are 2” but can’t find any information. Thank you!
 
fr8dog said:
I would say follow the directions on the Noflex bottle. Don't be in a hurry to empty the tank. When it's time from normal use empty then continue with the Noflex. May take a bit of time but the stuff just works.
Click to expand...

Ok, thank you.
 
Blown284 said:
Hi folks. I just had my new props put on and didn’t realize that I had shaft zincs and also didn’t realize I have 4 swim platform zincs (doh!). So I have to get her pulled again. What zincs should I get for the swim platform? I believe they are 2” but can’t find any information. Thank you!
Click to expand...

It would be cheaper to put a diver under the boat for zincs than haul it again...
 
Last edited:
Blown284 said:
Hi folks. I just had my new props put on and didn’t realize that I had shaft zincs and also didn’t realize I have 4 swim platform zincs (doh!). So I have to get her pulled again. What zincs should I get for the swim platform? I believe they are 2” but can’t find any information. Thank you!
Click to expand...
Get a diver to put the zincs on. No need to pull the boat. My diver does all my zincs.

+6/
 
While the boat was getting pulled out of the water, I asked the operator for approx weight. Holy smokes is this boat heavy. He indicated it was approx 39k. I had a full tank of fuel, half tank of water, dinghy was on the platform but had no idea this boat weighed this much. Is that typical for a hard top and swim platform boat?
 
You must log in or register to reply here.

Forum statistics

Threads
113,225
Messages
1,428,914
Members
61,117
Latest member
cowiekc
Back
Top