mrl38
Member
Thanks- so wiring run from battery terminal to main breaker and then main breaker to contact terminals and then contact terminals to switch>?
460 DA Owners Thread
- Thread starter Russ Calasant
- Start date
Thanks- so wiring run from battery terminal to main breaker and then main breaker to contact terminals and then contact terminals to switch>?
mrl38
Member
Are there any other fuses somewhere? Wiring diagram doesnt show - the electronics switch on DC distribution panel loos like it has its own Terminal Stud - fuse somewhere?
401Kation
Another blow boater gone to the dark side...
I'm not aware of any fuses. Breakers are in the port side cabinet and underneath the switches at the helm station to starboard.
FYI: There is a fuse panel IN the dash just to the port side of the wheel. It contains fuses for electronics only. (I have since reconfigured all this.)
401Kation
Another blow boater gone to the dark side...
Oh yea, forgot about that one. Thanks for the pic!
mrl38
Member
Thanks for everyone’s help. Found a broken wire attached to the port side stud behind the breaker panel. Recrimped that and have electronics back (vhf, stereo, chartplotters, auto pilot).
Still no running lights or anchor light but will check power to those tomorrow and try to trace.
anyone know what brand / model the overhead spoiler lights are on the 460? We have two inspection plates that look like they used to be lights and I’d like to put them back in.
Still no running lights or anchor light but will check power to those tomorrow and try to trace.
anyone know what brand / model the overhead spoiler lights are on the 460? We have two inspection plates that look like they used to be lights and I’d like to put them back in.
All's Well
Well-Known Member
FWIW - I had the same 2 inspection plates on our 460
mrl38
Member
Sea Ray wiring schematic has a mention of a bilge harness for bilge pumps, sump pumps, blowers, etx. WHere in the bilge is this harness? I dont see a main panel down there on the 460.
Joint Custody
Well-Known Member
- Jun 2, 2008
- 5,024
- Boat Info
- 1998 450 Sundancer, Achilles dinghy w/15hp
- Engines
- 3126 Cat's
Mine is located in my ER... 14 years old and no problems.
Jeff Pierce
Member
My Windshield vent window is leaking badly. Taylor no longer has the seal that goes around. Any ideas?
401Kation
Another blow boater gone to the dark side...
1 package
- Taylor Made Products 1725 Boat Windshield D-Sponge Gasket
Qty: 1 | Sold by Amazon.com Services LLC
Joint Custody
Well-Known Member
Selling off below.
120.00 for the lights
100.00 for steering wheel
50.00 for the clock
250.00 each for the pumps Cummins 6CTA8 600 hours on them and I will throw in the impellers, pumps are good . I upgraded to Tonys pumps.
Pumps have only been in fresh water!
You pay freight.
120.00 for the lights
100.00 for steering wheel
50.00 for the clock
250.00 each for the pumps Cummins 6CTA8 600 hours on them and I will throw in the impellers, pumps are good . I upgraded to Tonys pumps.
Pumps have only been in fresh water!
You pay freight.
Last edited:
mrl38
Member
How old are the pumps?
Joint Custody
Well-Known Member
They have 600 hours on them. all worked well.
Jeff Pierce
Member
Thanks 401Kation. I will order that.
mrl38
Member
Our door to the salon seems to have come apart. Seems like there used to be two studs that would take the first panel with the second but we’ve lost those. Has this happened to anyone else and have had it repaired ?
Attachments
- Dec 31, 2006
- 2,824
- Boat Info
- H2O Therapy
2006 Sundancer 48
Novurania 430DL
HighField 340-FCT
Yamaha EX-R
Raymarine
PADI DM
- Engines
- Cummins QSC 540's
- Jul 11, 2012
- 885
- Boat Info
- 2000 ~ 510 Sundancer
2024 ~ Highfield 360 Sport
Twin Axiom 12" MFD's
AIS 700
- Engines
- Twin Cat 3196's
Thanks Joint Custody, this was a great idea and nice addition. Even the Admiral said she liked it!
Joint Custody
Well-Known Member
Looks great.
I am really OCD and what I like about it is how it is in 3rds so it always looks correct even when not going straight forward.
