Darryl LaMonico
New Member
I have an unstable (wobbly) table on the bridge of my boat. Any solutions out there for a quick secure fix for the screws pulling from the floor?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
I have an unstable (wobbly) table on the bridge of my boat. Any solutions out there for a quick secure fix for the screws pulling from the floor?
Thanks, very helpful. What did you use to fill the old holes?I had to remove mine, reseal it and reinstall. It leaked when I washed the bridge and got into the cockpit ceiling trim causing it to fill with water and sag quite badly...
The cockpit ceiling trim is easy to remove if you want to through bolt it. I used a paint scraper to pry it off. You can buy the replacement Christmas Tree plugs on amazon.
You can use 3M 5000 marine sealant or Marinetex epoxy filler if you want to re-drill in the same holes.Thanks, very helpful. What did you use to fill the old holes?
I would love to get rid of mine and put in some more refrigeration or a wine cooler . But the damn thing does come in handy..To correct the listing problem has anyone removed the washer / dryer combo unit? I notice it is on the starboard side.
And does anyone even use the washer and if you have removed it what did you put in it’s place?
Hey guys I plan to use fly bridge to sleep some people over this weekend. Do you guys know what cushions fill in table once it's collapsed? Thanks.
I open the medicine cabinet when I brush my teeth. Gives a reasonably straight shot down at the sink!Nice touch with all the upgrades.
Has anyone replaced vanity tops in the heads ?
I am thinking of setting the medicine cabinets back a few inches. Fabricate new counters with different sinks so you can get your head over the sink. I get more water on the floor than in the sink when I wash up.
On your trim tab, did you go with larger and if so how much larger? I've been thinking that I might upgrade to larger tabs on next haul out.Just wanted to share with you some mod’s and upgrades that were done as a part of my transom module extension. Almost there ...
View attachment 109511 View attachment 109512 View attachment 109514 View attachment 109515 View attachment 109517 View attachment 109531
On your trim tab, did you go with larger and if so how much larger? I've been thinking that I might upgrade to larger tabs on next haul out.
That would be great, and would really be great to get feedback from you once you use boat with the bigger tabs how much improvement it makes. Seems like my boat at least needs a lot of tab down for running at planning speeds and would be nice to not need to use so much tab. I have to think yours will have a good bit less drag!Yes, definitely went larger but the single ram couldn’t hold it down so a second was added. Not sure of the dimensions, I just told them to go as big as possible for the space available.
I can find out for you though.
Very nice teak work! I'm sure you will really enjoy the extra cockpit space. It was quite a project you undertook.Just wanted to share with you some mod’s and upgrades that were done as a part of my transom module extension. Almost there ...
View attachment 109511 View attachment 109512 View attachment 109514 View attachment 109515 View attachment 109517 View attachment 109531
Very nice teak work! I'm sure you will really enjoy the extra cockpit space. It was quite a project you undertook.
I’m hoping the change is noticeable. Still going to put the ballast in the guest cabin so that should help keep the nose down a bit too. I’ll keep you posted.That would be great, and would really be great to get feedback from you once you use boat with the bigger tabs how much improvement it makes. Seems like my boat at least needs a lot of tab down for running at planning speeds and would be nice to not need to use so much tab. I have to think yours will have a good bit less drag!
I think noticeable is an understatement. Very nice can’t wait to see it finishedI’m hoping the change is noticeable. Still going to put the ballast in the guest cabin so that should help keep the nose down a bit too. I’ll keep you posted.
Everything looks great, I like the rear hatch opening opposite and the teak work. Looks like you gained nearly 2 feet extra spaceJust wanted to share with you some mod’s and upgrades that were done as a part of my transom module extension. Almost there ...
View attachment 109511 View attachment 109512 View attachment 109514 View attachment 109515 View attachment 109517 View attachment 109531