Becka
New Member
Im going to try that next week. Ill let you know how it goes.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Fully seat the metering screws (gently!) counting the turns on the way in for reference. Now remove the screws completely and blast the hole with carb cleaner from the straw(watch your eyes). You should get flow from a hole near throttle plate and an air bleed in the ventury area. Blast these exits too if you can. Take turns blocking these exits with your finger to get passage ways cleared good.!