Artemus6
Member
Your vacuflush is a 12v system. On your 12vDC breaker panel you have a breaker labeled “Head” I believe. Turn this on. This will activate your vacuflush pump and your system will build up vacuum pressure. Beside the key to the right of the toilet, there is a green and red light if I remember correctly. Green means OK to flush, red means no.
If you want to dump the holding tank overboard, you should have a 12v breaker that is labeled “Macerator.” Turn this breaker on. Then once you are 3+ miles offshore, open the ball valve in the bilge that is on the macerator line. Go into the head, push and hold the little black button beside the key and turn and hold the key as well. This energizes the macerator pump and should empty the tank.
Bennett
The problem is for one thing, I flip the breaker on at the DC panel and hear nothing happen. Does the fresh water tank need water in it to trigger the vacuflush to build vacuum?
And in the head, I dont find any other controls, like waste tank level or mercerator.