2005, 340 Sundancer Sink Replacement

Discussion in 'Sport Cruisers' started by Bill Sampson, Jun 11, 2018.

  1. Bill Sampson

    Bill Sampson New Member

    10
    Jun 10, 2018
    2005 340 Sundancer
    E80 GPS
    Twin 496 cid
    496. CID
    New Member:
    I recently purchase a 2005 Sundancer 340 (My third Sea Ray as Owner)
    The wet Bar sink is cracked and I would like to replace.
    The part number is: 1689318 SINK, V/F WET BAR ARW 340DA-03

    Any suggestions?
     
  2. KevinC

    KevinC Well-Known Member

    Feb 25, 2011
    Long Island, NY
    2004 340 Sundancer
    1988 Proline Center Console - 90hp Mariner/Mercury
    1969 Boston Whaler
    Twin 8.1 V-drives
    I am in process of renovating both the cockpit and the head counters and sinks. If interested I will be posting more info. Otherwise I may have a cockpit sink available when mine comes out if it is in one piece. My head sink is crack which is the reason for the work.

    -Kevin
     
  3. Sea buzz

    Sea buzz Member

    36
    Oct 11, 2015
    Lake Champlain
    2006 340 sundancer
    8.1 vdrives
    Did mine last year. Had trouble finding the sink. Really expensive
     
  4. Bill Sampson

    Bill Sampson New Member

    10
    Jun 10, 2018
    2005 340 Sundancer
    E80 GPS
    Twin 496 cid
    496. CID
    Thanks Kevin, I would be interested in it.
     
  5. Stee6043

    Stee6043 Well-Known Member

    Jun 1, 2015
    West Michigan
    1997 Sundancer 400
    7.4L Gassers
  6. KevinC

    KevinC Well-Known Member

    Feb 25, 2011
    Long Island, NY
    2004 340 Sundancer
    1988 Proline Center Console - 90hp Mariner/Mercury
    1969 Boston Whaler
    Twin 8.1 V-drives
    It's a non-standard size sink. For just the cockpit replacement @Bill Sampson could probably pickup a larger round sink and cut out. My problem is it's the same size sink in the head and to cover the X length the sinks are too wide on the Y. Sinks that fit on the Y leave a gap on the X. Therefore I have to (well really prefer to) put in a counter and mount the sink.

    -Kevin.
     
  7. KevinC

    KevinC Well-Known Member

    Feb 25, 2011
    Long Island, NY
    2004 340 Sundancer
    1988 Proline Center Console - 90hp Mariner/Mercury
    1969 Boston Whaler
    Twin 8.1 V-drives
    @Bill Sampson if you are in a rush to get this repaired we might be able to exchange ideas on how to replace and re-route the plumbing that I a working on - PM me if interested.

    -Kevin
     
  8. Bill Sampson

    Bill Sampson New Member

    10
    Jun 10, 2018
    2005 340 Sundancer
    E80 GPS
    Twin 496 cid
    496. CID

    Attached Files:

  9. Bill Sampson

    Bill Sampson New Member

    10
    Jun 10, 2018
    2005 340 Sundancer
    E80 GPS
    Twin 496 cid
    496. CID
    Here is an option
     

    Attached Files:

  10. KevinC

    KevinC Well-Known Member

    Feb 25, 2011
    Long Island, NY
    2004 340 Sundancer
    1988 Proline Center Console - 90hp Mariner/Mercury
    1969 Boston Whaler
    Twin 8.1 V-drives
    That's not going to work for that location - you are limited on your sink depth because of the fridge below it. The drain will also need to be offset to one side to clear the fridge. You are also going to need to be aware of drain sizes, baskets and fittings to match the drain pipe.

    It is also recommended by many of the marine manufactures to stay away from high polished stainless and go with the brushed. I am not sure if it is because of the finish not staying bright or if it is because of the potential of the sun reflecting and causing problems.

    I chose a brushed finish for my sink and new faucet in the cockpit and a high polished for my head sink. I am also replacing the stock faucet in the head with a modern two part faucet (not a pullout in the conventional sense) shower head unit.

    -Kevin
     
    Bill Sampson likes this.
  11. beerman

    beerman Member

    443
    Feb 16, 2007
    Wis. Dells, Wisconsin
    2006 340 Sundancer
    8.1 LTR VDrives
    I just replaced my cockpit sink in my 06 340. I went through a Sea Ray dealer. They still have them in stock.
     
  12. Bill Sampson

    Bill Sampson New Member

    10
    Jun 10, 2018
    2005 340 Sundancer
    E80 GPS
    Twin 496 cid
    496. CID
    Thanks,
    Out
     
  13. Bill Sampson

    Bill Sampson New Member

    10
    Jun 10, 2018
    2005 340 Sundancer
    E80 GPS
    Twin 496 cid
    496. CID
    Thanks,
    Out of curiosity what did they charge?
     
  14. Bwardz50

    Bwardz50 New Member

    7
    Jul 3, 2018
    Lutz, FL
    2006 340 Sundancer
    2005 Mastercraft X2
    8.1 Mercruiser Horizon
    Iā€™m interested in the cost for this sink as well, thanks!
     
  15. beerman

    beerman Member

    443
    Feb 16, 2007
    Wis. Dells, Wisconsin
    2006 340 Sundancer
    8.1 LTR VDrives
    i think it was around $200.
     
  16. Bill Sampson

    Bill Sampson New Member

    10
    Jun 10, 2018
    2005 340 Sundancer
    E80 GPS
    Twin 496 cid
    496. CID
    Here in Canada the sea ray dealer wants $419.00
    The sinks are pretty cheaply made and are thin. Presently I gave mine to a guy who is going to glass it. Waiting to see what it looks like
     
  17. KevinC

    KevinC Well-Known Member

    Feb 25, 2011
    Long Island, NY
    2004 340 Sundancer
    1988 Proline Center Console - 90hp Mariner/Mercury
    1969 Boston Whaler
    Twin 8.1 V-drives
    We're still going the stainless sink route, however, I am not able to proceed because of all the up coming weekends we have planned use.

    Too short of a season to loose our sinks for renovations. Plans are now to start after labor day when kids are back to school.

    -Kevin
     
  18. JVM225

    JVM225 Well-Known Member

    Apr 8, 2008
    Farmingdale, NY
    2002 410 Sundancer, Monaco Edition.
    3126 Cats.
    I think replacing the white cockpit sink and faucet with stainless sink and chrome faucet was the first thing I did when I brought the boat home last year.
    Doing that and adding the cockpit floor covering changed the look of the boat a lot.
    I had to do a very little bit of trimming with a dremel to get the new sink to fit perfectly, and while the sink and faucet were easy finds the drain took a bit of searching but it was worth it.
     

Share This Page

Show Sidebar