Jaay757
Member
- Jun 18, 2012
- 141
- Boat Info
- 2006 sea ray 340 sundancer (sold)
- Engines
- 8.1's, ZF IV V drives
Hi all,
I went to finish up cleaning the bilge after winterizing last week and could not get the engine hatch to lift. absolutely nothing !!!I have never had a problem with this prior to. I checked the transom door switch and does not appear to be that. I pulled the pins and got the hatch up manually. I checked all the fuses in the bilge for the hatch. I am leaning towards three items that I need to test. 1. switch, 2. relay, 3. actuators. It would baffle me that 2 actuators would go at the same time so I am thinking a power issue. I did also notice that the manually activated bilge pump is also not working on the switch panel (same panel) there is no power to light up the switch. This also did work prior to this. I am thinking both issues must be related but not sure where to look. Any ideas or thoughts would be appreciated.
Thanks
Jason
I went to finish up cleaning the bilge after winterizing last week and could not get the engine hatch to lift. absolutely nothing !!!I have never had a problem with this prior to. I checked the transom door switch and does not appear to be that. I pulled the pins and got the hatch up manually. I checked all the fuses in the bilge for the hatch. I am leaning towards three items that I need to test. 1. switch, 2. relay, 3. actuators. It would baffle me that 2 actuators would go at the same time so I am thinking a power issue. I did also notice that the manually activated bilge pump is also not working on the switch panel (same panel) there is no power to light up the switch. This also did work prior to this. I am thinking both issues must be related but not sure where to look. Any ideas or thoughts would be appreciated.
Thanks
Jason