wot

  1. D

    6.2L not reaching maximum RPM's.

    New poster here! I bought a 2016 Sea Ray 270SD with 160 hours on it a few months back and have had it out several times since. I've noticed that it planes quick and pulls great all the way to 4500 rpms... and that's it. At WOT it will pin at 4500 @ 40mph. Everything about the boat is perfect...
  2. E

    Not Getting Max RPM at WOT on 7.4Lt 380 Horizon MPI

    I have a '99 380 Dancer that's been amazing, however, I'm not getting maximum RPMs at WOT. I always check for WOT performance at the beginning of the season with a clean bottom to get a baseline, and to see if anything isn't working right. I traditionally get to 4,500 RPM at WOT (should be...
  3. C

    Sea Ray 40 Cummins QSB 380 Prop size

    Hi Everyone, I asked this on a different part of this forum, so sorry for the repeat. I have a 2007 Sea Ray Sundancer 40...great boat! It has twin Cummins QSB 380's and I have 21" dia x 23 pitch nibral props. I'm pretty sure I'm over propped as I cannot achieve max RPM @3060. In fact, I'm...
  4. H

    185 Sport 2007 Stalls Shifting from WOT and then immediately into Neutral - Thoughts?

    Hi, I'm a new owner and new to the club :) Basically I'll start up fine (after pumping the throttle 2 times first), head out fine, open her up (WOT) and then when I want to come to a complete stop (shift immediately into neutral) the boat sounds like it gets bogged down and completely stalls...
  5. C

    How long can you run at WOT

    Hello. First post on this board. Just bought a '11 205 Sport with 4.3 MPI. Does anyone know how long you can run this engine at wide open throttle safely after it has been broken in? I could not find anything on the Mercruiser site and I searched the forum here with no luck. Do you ever...
  6. ziptdodah

    Loss of power underway after overheat

    Hello all! I'm a new member here so please be patient with my post. I have an 1989 Sea Ray BR200, 4.3LX with a Gen I Mercruiser outdrive. I recently had an overheat condition at low speed. She got hot enought to sound the alarm. I put her in neutral and increased the water flow and brought...
Back
Top