mercury

Hi all. Newbie boater here needing help. I have a 99 SeaRay with a 125HP Mercury outboard. I’m having issues with the throttle only button on my Quicksilver 3000 throttle control unit. I depressed the button and gave it throttle to start the boat like I usually do. Only this time the button...

I have for sale a pair of mercury 8.1 liter engines with transmissions from an 05 searay 390. The engines were removed last winter and replaced with a set of Cummins Diesels. The motors ran fine when removed, no overheating or oil issues. They have ZF transmissions mounted to them with 2.5...

Hi all, my mechanic has diagnosed a faulty ECM in the port motor of my 2006 Sundancer 320. Mercury 350 MPI. Anyone have one of these to sell? Apparently doesn't have to be precise serial number as it can be reprogrammed.

Hello everyone, I want to share with you my experience After having the boat stopped in a dry storage for a month when I want to start it and I had 2 beeps alarm every minute on my 2006 Mercruiser 5.0 MPI with 300 hours. After reading several posts I thought it could be the IAC valve, I changed...

Hi purchased a 2007 SeaRay with Mercury 383 Repower by previous owner, unfortunately the unit uses excessive oil, end of year 2 of 3 year transferable warranty......I believe its ring seal and/or bad pistons used etc. Anybody had any experience with this? THanks Anybody have any similar issues

Hi purchased a 2007 SeaRay with Mercury 383 Repower by previous owner, unfortunately the unit uses excessive oil, end of year 2 of 3 year transferable warranty......I believe its ring seal and/or bad pistons used etc. Anybody had any experience with this? THanks Anybody have any similar issues

Earlier this month we were cruising up in Desolation Sound and while I was at the helm running about 26 knots at 2800 rpm, we suddenly felt a very bad vibration and loss of power. I immediately put the boat in neutral (450 DA with Zeus pods). We didn't feel that we had hit anything but checked...

We took our 2010 450DA in for annual maintenance and when the Zeus technician examined the props, he found that the starboard prop shaft seal was leaking (see pic): https://www.amazon.com/photos/share/o3Z8f5tv7SclgczWhGgpypcyuEz8R97afZUES2p746T We agreed to order the necessary parts last week...

Anyone has a link to a video that shows how to flush the engines on a 2011 sundancer 350 with fresh water? Engines: Mercury 496 MAG

Have a Smartcraft Vessel View Part # 8M0034881 new in the box. Only has display with no cables. Will take 200.00. Can send pics upon request. Thanks

I have a 1988 Like New Mercury 5hp trolling motor + stand for sale in lower Michigan, long shaft. $550 firm.

Looking to sell a used High Pressure floor for Mercury 310 Airdeck or Sport dinghy. Will fit any 310 made after 2004. No leaks, no patches, clean condition. I'll send detailed pics on request. Price for new one on Defeder is $409.00. Best offer plus actual shipping will take it...

Hi, I recently purchased a 1990 Sea Ray 160 BR with a 1990 Mercury 115hp engine. Unfortunately the cowling came off on the drive home. The trip from the marina was well over 100miles. The marina promised me a replacement since they were at fault, but months later no cowling, and now they...