Hello Everyone
I just purchased a 1999 400 Sundancer with CAT engines. The Starboard fuel sending unit has gone and i cant find the unit on the tank as there is not much space to visually inspect or service the system.
I did trouble shoot the gauges on the dash, and the fuel sending unit on...
I've looked for a resource that addresses these vintages. I know most newer boats go back to the dealer for OEM and repairs, but post-IAN, it's hard to get anyone to return a call, so I'm looking for any advice I can get to repair some of the damage I incurred, replace stock parts, etc.
I have a set of props removers from my 1998 400 Sundancer with 3116 TA Caterpillar engines. There is some galvanic pitting from the boat next to me on one of these as shown in the pictures. They were balanced and tuned about three months before removal. They are 22x23 nibral 4 blades. 1-1/2”...
Pair of 3/4” shaft props. Best offer. One will need to be reconditioned as the boat next to us in the marina had a bonding issue.
Contact me for more pictures.
I have a 1997 400 diesel Sundancer. I recently replaced the dash panels, which requires removing all the wiring to the toggle switches and then reattaching the wiring to the switches in the new dash panel. Well I got every switch rewired correctly, except the starboard ignition switch. There...
I am digging into this boat and see that it has rope lighting under the bottom edge of the galley cabinets. Does anyone with a similar model year have these? I would think there is a 12v transformer for them somewhere but can't find it. If they are original equipment, what switch are they...
Hey all,
We're looking for a 400 or 410 Dancer, or 400 Express preferably in Lake St Clair or Lake Erie.
Diesels, good canvas, clean boats only.
Thanks,
Pat